Frequently Asked Questions

Question:

"My lights dim when I use my microwave"

Answer:

This is caused by the lighting circuit being on the same circuit as your microwave. Most new microwaves draw over 10amps of current. This reduces the amount of current going to the lights which cause them to dim when using the microwave, a vaccum, or other high current draw appliances.

Remedy:

Run a dedicated circuit from your breaker panel to the microwave.

Question:

"My breaker trips when I use my electric heater"

Answer:

This is caused by the current draw of the electric heater. Most electric heaters are rated in wattage. For each 100 watts the current draw is 1amp. For example: A 1500 watt electric heater will have a current draw of 15amps. Most utility circuits (outlets) in bedrooms are connected to other bedrooms or lighting. The circuit is usually a 20amp circuit. This over-current condition will cause the breaker to trip. If breakers trip too often, they become weak and lessen their current carrying capabilities.

Remedy:

Run a dedicated circuit from your breaker panel to the heater location. Have existing breakers checked for your safety.